In case of power failure, LED battery luminaires from IVT and Staudte Hirsch equipped with the emergency light function become reliable emergency and safety illumination in rooms, corridors and staircases, especially in areas without windows or emergency power supply.
The emergency light function works on the standby principle: if the battery lamp is in the charging cradle during a power failure, it switches on automatically. The switching time is approx. 1 second. Due to the high-quality lithium batteries, a runtime of at least 4 hours is achieved at full power level.
Source:
https://www.zdf.de/nachrichten/politik/bbk-blackout-stromabschaltung-winter-energiekrise-100.html
Status 23.11.2022, 12:50 p.m.
Can be used as emergency lighting outside explosive environments
The emergency lighting function is integrated into the Ex lamp as standard.Outside the hazardous area, the Ex-certified LED work light PL-AT800 can also be used as emergency lighting. Item no. 312218 To the product > |
Type | Product description |
Light sources: 2 x 8 W LED Luminous flux: 1040 lm Current supply: Li-Ion 7.4 V | 8 Ah Lighting modes: 5 Operation time: 6 h (100 %) |
|
Light sources: 3 W LED Luminous flux: 1225 lm Current supply: Li-Ion 7.4 V | 2.2 Ah Lighting modes: 2 Operation time: 4.5 h (100 %) |
|
IVT PL-828 Light sources: 5 W LED Luminous flux: 350 lm Current supply: Li-Ion 7.4 V | 4.4 Ah Lighting modes: 3 Operation time: 4 h (100 %) |
|
IVT PL-850 Light sources: 3 W LED Luminous flux: 240 lm Current supply: Blei 6 V | 4.5 Ah Lighting modes: 4 Operation time: 20 h (100 %) |
|
IVT PL-830 Light sources: 3 W LED | 0,8 W SMD LED Luminous flux: 240 lm | 40 lm SMD LED Current supply: Li-Ion 7.4 V | 1.6 Ah Lighting modes: 5 Operation time: 5 h (100 %) |
|
Atexbeam PL-AT800 Light sources: 3 W LED Luminous flux: 275 lm Current supply: Li-Ion 7.4 V | 5.8 Ah Lighting modes: 2 Operation time: 9 h (100 %) |
Step 1 Connect the charging cradle or charging/wall bracket to the power supply unit and the power supply unit to the power supply. |
|
Step 2 Switch the light on. For the SH-5.100, SH-5.300 and PL-850 models, you can select the mode. |
|
Step 3 Place the light in the charging cradle. The light goes out. |
|
Step 4 Simulate a power failure by unplugging the mains adapter from the socket – the light switches on automatically in the selected mode or at the brightest brightness level. |
Step 1 Connect the charging cradle or charging/wall bracket to the power supply unit and the power supply unit to the power supply. |
Step 2 Switch the light on. For the SH-5.100, SH-5.300 and PL-850 models, you can select the mode. |
Step 3 Place the light in the charging cradle. The light goes out. |
Step 4 Simulate a power failure by unplugging the mains adapter from the socket – the light switches on automatically in the selected mode or at the brightest brightness level. |
Item no. 312218