+49 9622 719910

Lighting Technology

Benefit from decades of experience

Since 1996, IVT has been developing rechargeable work lights and hand lamps. We are driven by a passion for technology and the desire to develop innovative products at an extremely fair price-performance ratio.

The engineers at IVT have therefore set themselves the goal of developing products under the professional brand STAUDTE HIRSCH that set new standards in their category. Discover the unique combination of over 25 years of engineering expertise paired with the use of the latest technologies. Discover our high-quality lamps from IVT and Staudte Hirsch:
 

Lighting IVT

Lighting Staudte Hirsch

Lighting range from IVT and Staudte Hirsch

Work Lights | Hand Lamps

Emergency Lamps

Floodlights 230 V

Torches

Lighting 12 V/24 V

Ex-certified Lamp

FAQ | Useful informations

Advantages of LED lighting

+
LED light sources are characterised by the following main advantages compared to conventional light sources:
 
  • Lower power consumption (6 times lower than with conventional bulbs)
  • Long duty cycle of the LED lamps (up to 50,000 hours)
  • They don’t contain any harmful substances
  • High luminous efficiency
  • No start-up delay (as know from energy saving lamps)
  • Flexible application (for example, LED strips)
  • Compact and small design possible (for example, SMD LEDs)

What units are used to measure light?

+
Luminous flux (Lumen)
Is the value of the total radiation emitted by a light source as visible light. At this, the brightness sensitivity of the human eye regarding the various wave lengths is of significant importance. Two light sources of different color therefore have the same lumen value, if they are perceived as equally bright.

Luminosity (Lux)
The luminous flux directed to a certain area is indicated as luminosity. At this, 1 lumen per square meter equals 1 lux.

Luminous efficiency (Lumen/Watt)
This value defined the efficiency grade of a light source. The higher the value, the better the conversion of the consumed power into visible light. This value is perfectly suitable for any comparison of different light source regarding their efficiency.

Color temperature (Kelvin)
This value measured in Kelvin defines the optical color impression of a light source. The higher the value, the bluer the light appears. In the range of 5000 K for example, the temperature color is defined as daylight white.

Farbspektrum
 
Light colors according to DIN 5035
Light color  Color temperature in Kelvin
Warm white Below 3300 K
Neutral white  3300 K to 5000 K
Daylight white/cold white Above 5000 K

Color rendering index (Ra)
The so called CRI (Color Rendering Index) describes the ability of a light source to reproduce colors.
At this, the natural solar light has the best color rendering index (CRI = 100) and is used as reference. The higher the CRI value, the better the color rendering ability. A CRI index of 95 is regarded as excellent.

Explanation of symbols

+
IVT and Staudte Hirsch quality lamps have a wide range of features, functionalities and possible applications. An overview of the symbols used with brief explanations can be found in the following table.
 
3 W Luxeon 300 lm Light source
Maximum power consumption (e.g. 3 W) as well as the manufacturer (Luxeon) and/or type of the used light source |
Maximum luminous flux in lumen (e.g. 300 lm)
Abstrahlwinkel 80°, 70 m Beam angle and lighting range
The opening angle in which the light is radiated. (e.g. 80°) |
Maximum lighting distance in the strongest lighting mode (e.g. 70 m)
Lighting time 4 hours, 100 % LED Runtime
Maximum runtime (e.g. 4 h)
in the selected performance level (e.g. 100 %)
Blinklicht 35 Stunden Flashing function
Maximum runtime
in the selected flashing function (e.g. 35 h)
Li-Ion battery rechargeable Battery type
Details about the used energy source (e.g. Li-Ion)
with notice regarding the ability to be recharged.
Focusable, maximum lighting range up to 200 m Focusable light
max. light range (e.g. 200 m)
Emergency light function Emergency light function
In the case of power outage the lamp turns on automatically,
turning into a safe emergency light.
Magnetisch Magnetic
The light is attached using magnets
Fastening via click system  Clip Version
The light is attached using clips
Large operating radius thanks to 5 m long mains cable with Schuko plug®  Light with earthing contact plug
Cable length 5 m
1 m connection cable with open end Connection cable with open ends
1 m connection cable with open ends
Suitable for operation at temperatures from -20 °C to +70 °C Operating temperature
Suitable for operation at temperatures (e.g. +70 °C to -20 °C)
Housing protected against dust, rain and jet water IP 65 IP protection type
Defines the suitability of electrical equipment for the various environmental conditions
(e.g. housing protected against dust, rain and water jets)
Ex-protection Explosion protection
This product is suitable for use in environment with risk of explosion
Touch-switch Touch switch
The lamp is switched on /off by touching
Wall mounting Wall mounted
The lamp is suitable for wall installation
Ceiling mounting Ceiling mounted
The lamp is suitable for ceiling installation
CE CE symbol
This symbol confirms the fulfilment of elementary requirements regarding the applying EU regulations
Suitable for passenger cars Mobile application
Suitable for use in the most various vehicles (e.g. private car)
Suitable for 12 V and 24 V solar systems Stationary application
Suitable for us in buildings with autarchic 12 V/24 V power supply
(e.g. solar or wind power)

What is the IP protection class?

+

What is meant by the term protection class?


The protection type designation normally consists of the letters IP and two key figures. These indicate which degree of protection of a housing offers regarding touching or foreign objects, respectively (first key figure) and humidity or water, respectively (second key figure).

Example: IP 68 absolutely dust and waterproof housingely (second key figure)

 
Key figure 1:
Protection against dust
Key figure 2:
Protection against humidity and water
0  No protection 0  No protection
1  Protection against solid foreign objects with diameter > 50 mm 1  Protection against vertically falling drops of water
2  Protection against solid foreign objects with diameter > 12.5 mm 2  Protection against inclined (up to 15°) falling drops of water 
3  Protection against solid foreign objects with diameter > 2.5 mm 3  Protection against falling sprays of water
4  Protection against solid foreign objects with diameter > 1 mm 4  Protection against splash water
5  Dust-protected 5  Protection against jets of water (nozzle)
6  Dustproof 6  Protection against strong jets of water
  7  Protection against the effect of temporary immersion under water
  8  Protection against permanent immersion under water

More safety in the event of a power failure – battery-powered lights with emergency light function

+

How likely is a total power failure?
What is the best way to prepare for it?


Currently, the probability of a widespread collapse of the power grid in Germany is classified as very low - but it is also advisable to be prepared for a blackout or a regional brownout, which may only last a few hours – for example, by having rechargeable battery lamps with a switchable emergency light function and battery-operated flashlights ready to hand.


What is the difference between blackout and brownout?

In recent months, there has been more frequent talk of blackouts and brownouts in connection with a possible power outage or a short-term power cut in Germany. But what does this actually mean?
 

Widespread collapse of the power grid

A blackout is defined as a widespread collapse of the European transmission grid, something that has not happened since the Second World War. It could theoretically occur if the European transmission grid is confronted with several major disruptions at the same time - for example, due to a massive storm event that causes major damage to the grid. However, experts consider these large-scale power outages to be highly unlikely. What could theoretically become necessary, however, is a so-called brownout.

Controlled shutdown of the electricity grid

Brownout - or controlled load disconnection - refers to the targeted disconnection of individual regions and areas in order to save electricity and thus keep the grid stable. This has not happened in Germany since the Second World War and is considered a last resort by electricity grid operators when electricity demand can no longer be fully covered. Due to the tense situation on the electricity market, the problems of the nuclear power plants in France and the uncertainty of natural gas supplies, such brownouts have become somewhat more likely, but according to the grid operators, the risk is still rather low.
Source:
https://www.zdf.de/nachrichten/politik/bbk-blackout-stromabschaltung-winter-energiekrise-100.html
Status 23.11.2022, 12:50 p.m.


IVT Portable Lamp PL-830: Waterproof emergency light with IP67

 

Are rechargeable lamps more environmentally friendly than lamps with batteries?

Hand lamps with rechargeable batteries are much more environmentally friendly than mobile lights with disposable batteries.
Depending on the model and selected light mode, IVT and Staudte Hirsch work lights, hand lamps and hand lamps provide reliable light for between 4 and 35 hours.
 
Advantages of rechargeable battery technology – sustainability
  • Depending on the design, rechargeable batteries can be charged several hundred to a thousand times
  • Li-ion batteries can be recycled economically, disposable batteries cannot
  • The production of batteries requires between 40 and 500 times more energy than they release during use
  • According to the VDE, a battery charger has an efficiency of 90 to 95%

 

Which rechargeable battery lights have an emergency light function?

All battery-powered lights from Staudte Hirsch and IVT are equipped with the switchable emergency light function.
 
Type LED Work Lamp Staudte Hirsch SH-5.100, 2 x 8 W, 1040 lm
Staudte Hirsch
SH-5.100		 LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm
Staudte Hirsch
SH-5.300		 LED Work Lamp IVT PL-828, 5 W
IVT
PL-828		 LED Work Lamp IVT PL-850, 3 W, 240 lm
IVT
PL-850		 LED Portable Lamp IVT PL-830, 3 W, 240 lm, IP 67
IVT
PL-830
Light sources 2 x 8 W LEDs 3 W LED 5 W LED 3 W LED 3 W LED |
0.8 W SMD LED
Luminous flux 1040 lm 225 lm 350 lm 240 lm 240 lm |
40 lm SDM LED
Current supply Li-Ion Akku
7.4 V | 8000 mAh		 Li-Ion Akku
7.4 V | 2200 mAh		 Li-Ion Akku
7.4 V | 4400 mAh		 Blei Akku
6.0 V | 4500 mAh		 Li-Ion Akku
7.4 V | 2200 mAh
Lighting modes 5 2 3 4 5
Operation time
(Brightness/Mode) 		6 h (100 %)
11 h (50 %)
16 h (Flashing mode)		 4.5 h (100 %)
9.0 h (50 %)
 		 4 h (100 %)
8 h (50 %)
16 h (Flashing mode)		 20 h (100 %)
25 h (70 %)
30 h (30 %)
35 h (Flashing mode)		 5 h (100 %)
8 h (50 %)
18 h (Flashing mode)
35 h (SMD LED)
4.5 h (100 % + SMD)

Integrierte Notlichtfunktion

          

Can be used as emergency lighting outside explosive environments

Ex-protected LED work lamp ATEXBEAM PL-AT800, 3 W, Li-Ion battery
The emergency lighting function is integrated into the Ex light as standard.
Outside the hazardous area, the Ex-certified PL-AT800 LED work light can also be used as emergency lighting.
Item no. 312218
To the product >


How does the emergency lighting function work?

The emergency light function works according to the standby circuit principle.
If the battery-powered light is in the charging cradle during a power failure and this is connected to the mains, the battery-powered light switches on automatically in the event of a power failure. The switchover time is approx. 1 second.

Procedure: To activate the emergency lighting function on the IVT and Staudte Hirsch battery-powered lights
 
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 1 Step 1
Connect the charging cradle or charging/wall bracket to the power supply unit and the power supply unit to the power supply.
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 2 Step 2
Switch the light on. For the SH-5.100, SH-5.300 and PL-850 models, you can select the mode.
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 3 Step 3
Place the light in the charging cradle. The light goes out.
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 4 Step 4
Simulate a power failure by unplugging the mains adapter from the socket – the light switches on automatically in the selected mode or at the brightest brightness level.

Our tip: Always mount the emergency lights on the wall so that they are within easy reach
For the IVT PL-850 and PL-830 lights, the charging bracket is suitable for wall mounting. A sturdy metal wall bracket is available as an optional accessory for all other battery-powered lights.
How likely is a total power failure?
What is the best way to prepare for it?

Currently, the probability of a widespread collapse of the power grid in Germany is classified as very low - but it is also advisable to be prepared for a blackout or a regional brownout, which may only last a few hours – for example, by having rechargeable battery lamps with a switchable emergency light function and battery-operated flashlights ready to hand.

 

What is the difference between blackout and brownout?

In recent months, there has been more frequent talk of blackouts and brownouts in connection with a possible power outage or a short-term power cut in Germany. But what does this actually mean?



 

Blackout - widespread collapse of the power grid
A blackout is defined as a widespread collapse of the European transmission grid, something that has not happened since the Second World War. It could theoretically occur if the European transmission grid is confronted with several major disruptions at the same time - for example, due to a massive storm event that causes major damage to the grid. However, experts consider these large-scale power outages to be highly unlikely. What could theoretically become necessary, however, is a so-called brownout.


 
Brownout - controlled shutdown of the electricity grid
Brownout - or controlled load disconnection - refers to the targeted disconnection of individual regions and areas in order to save electricity and thus keep the grid stable. This has not happened in Germany since the Second World War and is considered a last resort by electricity grid operators when electricity demand can no longer be fully covered. Due to the tense situation on the electricity market, the problems of the nuclear power plants in France and the uncertainty of natural gas supplies, such brownouts have become somewhat more likely, but according to the grid operators, the risk is still rather low.
Source:
https://www.zdf.de/nachrichten/politik/bbk-blackout-stromabschaltung-winter-energiekrise-100.html
Status 23.11.2022, 12:50 p.m.

IVT Portable Lamp PL-830: Waterproof emergency light with IP67

Are rechargeable lamps more environmentally friendly than lamps with batteries?

Hand lamps with rechargeable batteries are much more environmentally friendly than mobile lights with disposable batteries.
Depending on the model and selected light mode, IVT and Staudte Hirsch work lights, hand lamps and hand lamps provide reliable light for between 4 and 35 hours.
 
Advantages of rechargeable battery technology – sustainability
  • Depending on the design, rechargeable batteries can be charged several hundred to a thousand times
  • Li-ion batteries can be recycled economically, disposable batteries cannot
  • The production of batteries requires between 40 and 500 times more energy than they release during use
  • According to the VDE, a battery charger has an efficiency of 90 to 95%

Which rechargeable battery lights have an emergency light function?
All battery-powered lights from Staudte Hirsch and IVT are equipped with the switchable emergency light function.
 
Type Product description
LED Work Lamp Staudte Hirsch SH-5.100, 2 x 8 W, 1040 lm Staudte Hirsch SH-5.100
Light sources: 2 x 8 W LED
Luminous flux: 1040 lm
Current supply: Li-Ion 7.4 V | 8 Ah
Lighting modes: 5
Operation time: 6 h (100 %)
LED Hand Lamp Staudte Hirsch SH-5.300, 3 W, 225 lm Staudte Hirsch SH-5.300
Light sources: 3 W LED
Luminous flux: 1225 lm
Current supply: Li-Ion 7.4 V | 2.2 Ah
Lighting modes: 2
Operation time: 4.5 h (100 %)
LED Work Lamp IVT PL-828, 5 W IVT PL-828
Light sources: 5 W LED
Luminous flux: 350 lm
Current supply: Li-Ion 7.4 V | 4.4 Ah
Lighting modes: 3
Operation time: 4 h (100 %)
LED Work Lamp IVT PL-850, 3 W, 240 lm IVT PL-850
Light sources: 3 W LED
Luminous flux: 240 lm
Current supply: Blei 6 V | 4.5 Ah
Lighting modes: 4
Operation time: 20 h (100 %)
LED Portable Lamp IVT PL-830, 3 W, 240 lm, IP 67 IVT PL-830
Light sources:
3 W LED | 0,8 W SMD LED
Luminous flux:
240 lm | 40 lm SMD LED
Current supply: Li-Ion 7.4 V | 1.6 Ah
Lighting modes: 5
Operation time: 5 h (100 %)


Integrierte Notlichtfunktion

Can be used as emergency lighting outside explosive environments

Ex-protected LED work lamp ATEXBEAM PL-AT800, 3 W, Li-Ion battery
The emergency lighting function is integrated into the Ex light as standard.
Outside the hazardous area, the Ex-certified PL-AT800 LED work light can also be used as emergency lighting.
Item no. 312218
To the product >

 

 

How does the emergency lighting function work?

The emergency light function works according to the standby circuit principle.
If the battery-powered light is in the charging cradle during a power failure and this is connected to the mains, the battery-powered light switches on automatically in the event of a power failure. The switchover time is approx. 1 second.

Procedure: Activating the emergency lighting function
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 1






Step 1
Connect the charging cradle or charging/wall bracket to the power supply unit and the power supply unit to the power supply.
 
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 2











Step 2
Switch the light on. For the SH-5.100, SH-5.300 and PL-850 models, you can select the mode.
 
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 3











Step 3
Place the light in the charging cradle. The light goes out.
 
Emergency lamps: Simulation of the emergency light function in the event of a power failure, step 4











Step 4
Simulate a power failure by unplugging the mains adapter from the socket – the light switches on automatically in the selected mode or at the brightest brightness level.
Our tip: Always mount the emergency lights on the wall so that they are within easy reach
For the IVT PL-850 and PL-830 lights, the charging bracket is suitable for wall mounting. A sturdy metal wall bracket is available as an optional accessory for all other battery-powered lights.

What is meant by the terms explosion-proof and ATEX directive?

+

Explosionsschutz

ATEX directive applies to devices used in potentially explosive atmospheres

ATEX is an abbreviation for the French term Atmosphères Explosiblesandaims to protect humans, the environment and machinery from explosions. ATEX directives apply to all devices, machines and protective systems that are used in potentially explosive atmospheres.

 

For which businesses are explosion-proof luminaires relevant?

The use of explosion-protected luminaires is particularly important in sectors and branches of industry in which highly flammable or explosive substances are used.

For example, the chemical industry, which works with gases or flammable liquids, the metal industry and the construction industry, as well as refineries that work with crude oil or biogases.

In agriculture and the wood industry, highly flammable dust mixtures are produced that could potentially lead to explosions. Only lamps with ATEX approval may be used in this environment.
 


For which applications is the Ex-certified LED Work Lamp ATEXBEAM PL-AT800 approved?

Ex-protected LED work lamp ATEXBEAM PL-AT800, 3 W, Li-Ion battery
Ex-protected LED work lamp ATEXBEAM PL-AT800, 3 W, Li-Ion battery
Ex certification for gas (Zone 1, 2) and dust (Zone 21, 22)
EX II 2G Ex ib IIC T4 Gb
EX II 2D Ex ib IIIC T150°C Db

 
EX Meaning of the labelling according to the ATEX directive
II ATEX device group
The ATEX explosion groups define the authorised place of use.
I =  Use in mining and underground workings
II = Use in all other areas, e.g. chemical plants, pharmaceuticals, oil rigs, refineries, etc.
2 ATEX device category (application in respective Ex-zone)
The devices are classified according to the conformity assessment procedure into device categories 1 to 3.
1 = No ignition sources are present in the event of rare and unexpected malfunctions
2 = No ignition sources are present in the event of malfunctions to be expected during normal operation
3 = No ignition sources are present during normal operation
G/D/M      Explosive atmosphere
The device groups and categories are supplemented by a letter for the potentially explosive atmosphere:
G = gas, vapour, mist, D = dust, M = methane, coal dust
1G |   Risk: constant, frequent or long-term
1G, 2G |   Risk: occasional
1G, 2G, 3G |   Risk: rare or short-term
1D |   Risk: constant, frequent or long-term
1D, 2D |   Risk: occasional
1D, 2D, 3D |   Risk: rare or short-term
M1, M2 |   Risk: mining
Ex     Explosion protected operation material
ib Ignition protection type
II C Explosion group for gases and vapours
The classification in explosion groups considers the probability of the presence of an explosive atmosphere and the simultaneous occurrence of a defect on the device which could lead to ignition. The hazard increases from A to C.
A: very high level of safety
B: high level of safety
C: normal level of safety
 
T4 Temperature class
The classification into temperature classed considers the ignition points of the gases/dusts and indicates the maximum allowed surface temperature of the device. The hazard increases from T1 to T6.
T1: 450 °C
T2: 300 °C
T3: 200 °C
T4: 135 °C 
T5: 100 °C
T6:   85 °C

What are Ex zones?
Potentially explosive zones are areas which require specific measures regarding the construction, installation and use of electrical and non-electrical devices.
 
device category 1 2 3
G (Gas, vapour, mist) 0 1 2
D (Dust) 20 21 22
Frequency constantly, long-term, frequently occasionally rarely or only for a short period

Our plus: Useful accessories

Accessories Light Technology


The original accessories enable versatile use at home and on the go, as they are perfectly matched to the durable lights from IVT and Staudte Hirsch.


Aided by the accessories, the lights can be securely fastened, reliably used and recharged no matter where.

If a charging adapter gets lost or the battery loses capacity, no problem. IVT supplies the required spare parts even years later.

Best lighting conditions at the workplace

LED work lamps for professional use

Optimum lighting with a long operating time
A major advantage of rechargeable LED work lights is that they can be used anywhere without a power socket. Once the work is done, the battery-powered lamp can be conveniently recharged at home or on the go in your car or truck with 12 V/24 V DC.
 
Further advantages of our LED work lamps
IVT and Staudte Hirsch battery-powered LED lamps are fitted with high-quality Cree or Luxeon LEDs as standard and have several light modes.

Depending on the type of light, they achieve pinpoint or wide-area illumination. Some models achieve peak operating times of up to 35 hours.

LED floodlight for professional use

Large-area and homogeneous illumination
The Staudte Hirsch LED floodlight is equipped with an extremely powerful 60 W COB LED with 6000 lm. Thanks to its large 120° beam angle, it is suitable for uniform, bright and wide-area illumination of enclosed spaces, construction sites, entire production halls or warehouses.
 
Further advantages of our floodlight
The robust floodlight impresses with its effective heat dissipation, its 5 m mains cable, the sturdy carrying handle and its 150° swivelling lamp base amongst other features.
 
Designed for the toughest long-term use
The LED floodlight is protected against dust deposits inside as well as rain and water jets from any angle (IP 65).

Ex-protected LED lamp for working

Light in hazardous environments
The Ex-protected LED work light is certified for use in Ex zones 1, 2, 21 and 22. Thanks to the 3 W high-performance LED, two brightness levels and a lamp head that can be swivelled through 120°, the lighting can be adapted to the user's individual requirements.

 

Further advantages of the Ex-protected lamp
The antistatic housing is shock and impact resistant, withstands high temperatures and is dust and waterproof in accordance with protection class IP 67.
 
Areas of application for Ex-protected lamps
In machine and control rooms, petrol stations, biogas plants, distilleries, fire brigades, border guards, police, THW and many more.

More security at home and on the road

Safety: Emergency lighting

Light in case of power failure
All IVT and Staudte Hirsch rechargeable lamps are equipped with the highly useful emergency light function as standard.

Description of function: If the battery-powered luminaire is placed in the charging base which is connected to the mains, it switches on automatically in the event of a power failure or blackout.
 
These days, Staudte Hirsch and IVT emergency lamps can be found in many commercial premises, hospitals, public buildings, factories, banks, underground car parks, private households and many more.

Safety: Warning light

Flashing light combined with an orange/yellow diffusing plate
Thanks to the selectable flashing light mode and the coloured diffusing plate that is included in the delivery, some of our rechargeable luminaires are suited for use as warning lights.
 
For example, to warn of hazards or accident sites and make them clearly visible to other road users even in the dark.
 
Product recommendations
All Staudte Hirsch and IVT LED work lights with integrated flashing light function and yellow/orange diffusing lens are suitable for use as warning lights.

Safety: Panic lighting

Bright as day floodlight
Floodlights are used for providing bright as day and uniform object and area illumination in private, public and industrial settings.
 
Alone or in combination with motion detectors and alarm systems:
The daylight-bright Staudte Hirsch LED Wall Floodlight is suitable for wall, ceiling and floor mounting and can be used as panic lighting in private homes, for large-area illumination of company buildings, car parks and much more.
 
Despite its luminous flux of 6000 lm, it saves up to 80 % energy compared to halogen lamps while providing extremely bright illumination.

Reliable lighting in all weathers

Light for security and search teams

Even in adverse weather conditions, guard and security services need to keep an eye on things and search and rescue dog teams need to look for missing people or objects.
 

They need easy to carry, robust, waterproof hand lamps or torches with the longest possible operating time.
 

Our customers use both the battery-operated LED torches as well as the rechargeable LED work lights and LED hand lamps.

Depending on the model and selected light mode, the maximum runtime of the handy LED luminaires is up to 32 hours.

Light for outdoor activities

Reliable companions in twilight and darkness
The mobile, water-resistant lamps are suitable for many outdoor activities such as camping, exploration tours, patrolling hunting grounds, fishing trips or when walking the dog.

Product recommendations
Compact LED torches, the magnetic LED Hand Lamp SH-5.300 with fastening clip as well as the waterproof LED Hand Lamp PL-830 with switchable path light are particularly suitable for these purposes.
 
The IVT LED Work Light with magnetic base and plug for cigarette lighter and standard socket is the perfect equipment for vehicles.

Light for professional drivers

70 % of our goods are transported by truck. But not everything always runs smoothly: the load and towing vehicle have to be checked at dark rest areas, additional lighting is required in the event of a flat tyre and so on.
 
Product recommendations
Many professional drivers, construction machinery operators, bus drivers, couriers and parcel service providers use our rechargeable Staudte Hirsch and IVT LED work lights and LED hand lamps.
 
All our lamps can be recharged in the vehicle with 12 V/24 V and at home with 230 V using the adapters included in the scope of delivery.

Efficient light for vehicles, boats & solar applications

Space-saving, robust and glare-free light

IVT and Staudte Hirsch produce energy-efficient 12 V and 24 V LED lights for indoor and outdoor use.
 
Vehicle fitters, do-it-yourselfers and outdoor specialists prefer to use the mostly waterproof LED lights in tradesmen's and service vehicles, motorhomes and caravans, off-road vehicles, lorries and boats.

The high-quality lighting is also used in conjunction with 12 V and 24 V stand-alone solar systems.
 
Product recommendations
  • The water-resistant Staudte Hirsch LED Strips adhere securely even under high temperature fluctuations indoors and outdoors. A 5 mm thick silicone coating protects the flexible LED strips from external damage.
  • The glare-free Staudte Hirsch LED interior lights with long-life Osram LEDs, integrated on/off button and ESD protection are easy to install. They can be attached using either strongly adhesive magnets or sturdy plastic clips. Further advantages: low installation height, particularly light

LED searchlight for vehicles with 12 V, 24 V, 36 V

Whether on construction sites, in lorries, off-road use, in agriculture and forestry or at night in the event of a breakdown:
 
The flexible LED worklight with magnetic base impresses with its homogeneous, bright and large-area illumination. The extra strong magnetic base provides a reliable hold even under the most extreme conditions. The additional rubber coating protects the paintwork from any damage.

The wide input voltage range enables flexible use in cars, SUVs, lorries, emergency and service vehicles, motorhomes, construction, agricultural and forestry vehicles and machines, boats, snow groomers and much more.

Connection is extremely simple: The magnetic LED searchlight is equipped with a 2.4 m long spiral cable with high restoring force. Thanks to the removable adapter ring, the vehicle power plug can be used in vehicles with a cigarette lighter or standard socket.
 
The dust and waterproof floodlight (IP67) can be used reliably in vehicles even in the most adverse weather and environmental conditions.

Our philosophy: Sustainability

From rechargeable batteries to the smallest screw –
we have the suitable spare part for you

 
3 year manufacturer warranty
IVT and Staudte Hirsch products are manufactured to a high quality standard and  in accordance with strict quality guidelines. We are so convinced of the longevity of our products that we extend the statutory warranty by a further year free of charge (rechargeable batteries excluded).
 
Spare parts service
Hard professional use can sometimes lead to wear and tear. The solution: Even years later, our first-class spare parts service will provide you with suitable original spare parts in the accustomed IVT and Staudte Hirsch quality. Please note, however, that repairs may only be carried out by authorised specialist personnel.
 
Repair service
Repairs can also be carried out for you by our qualified team of technicians. The repaired devices are usually returned to you quickly and after a careful inspection within 14 working days.
.
modified eCommerce Shopsoftware © 2009-2024